Laser cleaning Can Be Spaß für jedermann

It is also important to get rid of any particles from light emitting surfaces (Organische leuchtdiode) to avoid black, or even bright, spot effect on the display. After etching or via drilling steps, some debris also has to be removed. Laser processes can be successfully used for these cleaning applications with a good choice of the irradiation parameters.

With its precision and speed, contact free cleaning by means of laser is far superior to the chemical or mechanical removal process and can Beryllium automated just as easily.

Our mobile laser cleaning machine can replace dry ice cleaning in many applications. A good example is mold cleaning. The laser cleans without contact and without damaging the material. This increases the quality of the mold and the end product.

Due to the increasing demand for lithium-ion batteries for electric vehicles and consumer electronics devices, the efficiency of battery production is becoming increasingly important for machine builders and battery manufacturers. A very important manufacturing step in battery production is to selectively remove carbon / graphite-based coatings on the battery foil and expose the underlying aluminum or copper foils for the subsequent process.

Das Struktur ist sowohl rein 50W, wie sogar in 100W erhältlich ansonsten bietet eine flexible und robuste Lösung je die mobile Laserreinigung an verschiedenen Orten.

through the extraction of fumes from the air. Hinein other cleaning processes, removed material often contaminates the tools and may Beryllium deposited at other locations on the workpiece.

An alternate technology that could be employed to remove contaminants can be found through the use of laser systems. Many advantages come with this method of contaminant removal, such as a cleaning time accelerated 20-fold in the case of aerospace components. Other advantages presented include the possibility for more environmentally friendly cleaning, and the ability to employ remote controls.

Beam parameters like wavelength, average power, focus beam diameter etc. may need to Beryllium adjusted when applying the cleaning process to other circumstances.

Compact designed, all components are in the housing and will Beryllium air cooled. Maintenance free! Ur engraving laser JEWELliner "CUT" is very usefull to cut precious metals and soft metals till max. thickness of 2.5mm.

Even if you throw the ball a thousand times, you will always fail. The same applies to laser derusting. You can shoot the laser beam a thousand times but as long as the energy is below the ablation threshold of the material you’re working with, nothing will ever Beryllium removed.

Our research group at the Photo-Acoustics Research Laboratory at Clarkson University has reported that the Durchschuss of damage initiation (thermal or mechanical fracture) depends on the particle size that has to be removed and particle-substrate Organismus material properties, and the damage risk for sub-100 nm particle removal with DLC is found to be very high [46]. The thermal damage threshold is the melting temperature, and mechanical damage occurs above the yield Druck of the substrate material. Thus, the thermo-elastic simulations from [46] indicate that when silicon particles smaller than 600 nm are removed from a silicon substrate, and when silicon particles smaller than 630 nm Laser cleaning are removed from copper substrate using DLC, it would result in thermal and mechanical damage, respectively. It should be noted that the only effects considered rein the reported study were linear thermal and mechanical fields, and no other types of damage such as optical and electromagnetic damage mechanisms were considered. Delicate structures on substrates and processing techniques used to machine them sometimes substantially lower the local material yield properties, and such structures can amplify the laser beam on the textured surface due to diffraction, thus their cleaning requires substantially greater care than flat substrates.

The highly localized conversion of optical energy to heat leads to a very rapid temperature rise and consequently to evaporation of the material – possibly also involving partial or complete chemical destruction of the material. The strong temperature gradient resulting from the localized heating creates substantial mechanical Hektik, which often supports the removal process.

The removal can be implemented both statically and dynamically (processing-on-the-fly). The Auswahl of hairpins extends from round to rectangular in different dimensions with challenging hatching requirements for the scan systems.To clean all sides of the hairpins there are multiple solutions possible.

Rein some medical applications, there is a need to stimulate or record data from a number of nerves, within a very small space envelope.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Laser cleaning Can Be Spaß für jedermann”

Leave a Reply

Gravatar